Command Performance AV


home
Contact
About Us
Products
Services
Policies
Demo Equip.

Copyright ©2007
Command Performance AV

Products GamuT Audio List

Gamut Audio

 
 

D200 MKIII

MSRP: $8,750

Just think of how you love the clarity of the small class A amp, the fluid softness of the tubes and the sheer power of the mosfets. Ever wondered why you can’t have it all at the same time? Well don’t. The GamuT range of power amplifiers combines all the advantages and adds a power potential that will blow your mind. Take your pick – they come in 4 sizes. From 100 to 250 watts per channel. In stereo or monoblock configuration.

The Trouble With Power The transistor is a great invention for amplification in general. It’s effective on power, energy consumption and production cost. So far, so good. The flipside of it is however that transistors do not carry the same sound characteristics – even if they are built together on the same day. So a powerful amplifier made with 32 transistors is more likely to sound like a choir than a single and clear voice.

The GamuT Solution To achieve the purity and clarity that our clients demand, we have come up with a very simple and very effective solution. We only use one transistor per channel, but a very large one indeed. Using a single massive transistor allows us to tune them to sonic perfection and lay out a much simpler signal path. The transistors we use are massively expensive, but we think it’s worth it, and you might agree when you hear our amplifiers perform.

 

bullet

Shipping weight is 31 kg.

bullet

Dimensions are 164 mm high, 431 mm wide, and 470 mm deep.

bullet

Idle power consumption is 100 Watts.

bullet

The slow blow mains fuse limits power consumption at 1,150 Watts long-term.

bullet

Output power in 8 Ohms resistive load is 200 Watts or 23dbW.

bullet

Speaker loads below 1.5 Ohms are not allowed by the protection circuit

bullet

Noise is at least 100 dB below 200 Watts in 8 Ohms. This depends on the gain selected, and it is below

bullet

the noise from a CD.

bullet

Strong external electromagnetic fields can increase the noise level. Use only shielded signal cables.

bullet

The balanced XLR input has a 40 kOhm input impedance. The 3-pin XLR socket has Pin 2 as plus, Pin 3

bullet

as minus, and Pin 1 as ground. The RCA unbalanced input has a 20 kOhm input impedance.

bullet

Sensitivity can be selected internally by your dealer to be 0.775V, 1.55V, 3.1V or 3.9V for full power.

bulletThe output for a loudspeaker is single or biwiring, using 4 mm banana plugs, spade lugs or stripped wire.
 
 

 

Acoustic Zen • Apollo HiFi • APC • Atlantic Technology • Audience AV• Audio Electronic Supply • Auralex • Bellari • Berkline • BDI • Cambre • Cary • Cayin • Creek • Devore Fidelity • DVDO • Environmental Potentials • Echobusters • Equitech • FIM • Furutech • Gamut • Gefen • Gingko Audio • Harman Kardon • Harmonix • Hyperion Sound • Jaton • JVC Pro • Lector • Lovan • Marantz • ModWright • Music Hall • Niles • Nottingham • Panamax •  Panasonic • Parasound • Philips • Plinius • RTI  • Samsung • Sanus • Sennheiser • Shanling • Sharp • SoundCare • Straightwire • Target HiFi • Toshiba • Velodyne • Von Schweikert • Virtue Audio • Universal Remote Control • Usher Audio • WireWorld

home • Contact • About Us • Products • Services • Policies • Demo Equip.