|
1989 saw
the introduction of the PLINIUS
SA100 developed as a stereo
amplifier from early work done
by Gary Morrison and the small
PLINIUS design team. The SA100
broke new ground in that a
powerful Pure Class A amplifier
was available within an economic
package. Many hundreds were sold
under different guises
culminating in the SA102 in
2003.
Time passes, development continues and with the introduction of the SA Reference amplifier a new standard has been achieved for PLINIUS. The SA102 while very well received by the audio community was beginning to show its age. The PLINIUS SA103 has been developed on the heels of the newer PLINIUS amplifiers and it shares the sonic and aesthetic gains that have elevated these designs to new levels. The classic PLINIUS look has been maintained with the use of the distinctive heatsink profile that has allowed us to produce an amplifier capable of operating in Pure Class A up to 125 watts per channel without the use of troublesome fans or other methods used for cooling. Balanced circuits used in the SA103 allow full Balanced Mono operation in excess of 400 watts. The addition of another SA103 will provide an amplification system capable of the highest level of excellence without totally breaking the bank. As with all PLINIUS amplifiers, premium components have been used throughout. There is the addition of a 12 Volt trigger which will allow integration into a semi automated system. Sonically the SA103 embodies all that we have learned and will paint a very believable and transparent facsimile of a live musical event. A small group of dedicated technicians build each SA103 by hand in our New Zealand factory ensuring that our stringent standards are maintained. |
|
|
|
|
 |
|
Falls Church, Virginia
|
Copyright ©2008
Command Performance AV
|
Plinius Audio |
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
|
|
 |