Clearaudio Nano Phono V2 Phono Preamplifier

& Nano Phono Headphone V2

The Nano Phonophono stage isn’t ruffled by anything. External interferences are no longer an issue with this fine piece of engineering.

Its meticulously selected SMD components are assembled by hand in Erlangen and tested several times. The reward of these efforts is a signal to noise ratio of up to 84 decibels. The input impedance is set using plug-in links, so there is no loss of quality when using different moving magnet and moving coil cartridges.

The Nano Phono Headphone additionally contains a powerful headphone amplifier within the solid aluminium housing for private listening at the highest fidelity.

AMPLIFICATION @ 1 KHZ34 dB to 48 dB (MM mode)
54 to 68 dB (MC mode)
INPUT IMPEDANCE47 kOhm / 220 pF / MM mode
Individual / User / MC mode
MM / MC INPUTswitchable by jumper (at bottom)
SUBSONIC FILTERswitchable by jumper (at bottom)
RIAAdelay time: 75 ?s / 318 ?s / 3180 ?s
RIAA ACCURACY± 0.4 dB @ 20 Hz – 50 kHz
THD< 0,006% MC (“A” weighted @ 1 kHz / -1 dB @ Max)
HEADROOM18 dB / MC
SIGNAL TO NOISE RATIO70 dB (“A” Weighted)
81 dB (“A” Weighted)
CHANNEL SEPARATION> 80 dB @ 1 kHz / opposed channel hot-wired
MAX. OUTPUT VOLTAGE10 V eff. (1 kHz)
POWER SUPPLY± 18 V DC / 300 mA (external power supply)
INPUT / OUTPUTSunbalanced (RCA)
POWER CONSUMPTIONMax. consumption: 2.3 Watt
Consumption in operation: 2.3 Watt
Standby mode: < 0.3 Watt
Off mode: 0.0 Watt
TOTAL WEIGHT500 gram (Phono Stage and power supply)
DIMENSIONS (W/D/H in inches)3.35 x 4.17 x 0.98
DIMENSIONS (W/D/H in mm)85 x 106 x 25
WARRANTY3 years*
* Only if the Manufacturer’s guarantee card is filled out correctly and sent back within 2 weeks to Clearaudio.