Magico A1

The Magico A1 bookshelf loudspeaker features a fully braced aluminum enclosure, beryllium dome tweeter, carbon Nanographene cone, and our renowned elliptical crossover.

The A1 enclosure is constructed using 3⁄8” thick 6061 T6 aircraft grade aluminum, similar to the enclosure developed for the Q1 and is available in an elegant brushed-aluminum, black anodized finish. An innovative internal bracing technique along with the most advanced damping materials makes the sealed enclosure incredibly rigid and free of unwanted mechanical resonances. The complete enclosure design of the A1 is evaluated in simulation using the latest FEA software along with physical testing to meet the uncompromising requirements of Magico for optimized enclosure rigidity, stability and to ensure benchmark acoustical standards.

Featuring the same tweeter as the full-range A3, the Magico A1 utilizes a pure Beryllium-diaphragm with an optimized 28-mm dome based on the fundamental design platform and geometry of Magico’s reference M- Series tweeter. The customized neodymium motor system is encased in an improved back chamber with the company’s latest generation damping materials that facilitate ultra-low distortion, higher power handling, massive dynamic capabilities, and extended linear voice coil movement.

The newly developed 6.5-inch mid-bass driver features a Multi-Wall carbon fiber cone with a layer of XG Nanographene, providing optimal stiffness to weight ratio and an ideal damping factor. The driver frame has been designed, simulated, and tested for the optimal combination of stiffness and damping. Minimum acoustical impact is achieved through reducing vibration modes while maximizing air flow. The motor system incorporates extra-large magnets to ensure a stabilized magnetic field in the 39- mm pure titanium voice coil. The A1 mid-bass driver is optimized for minimal music related distortions in its bandpass, in both the frequency and time domains using state of the art finite element analysis simulation of acoustical, mechanical, electromagnetic and thermal behavior.

SPECIFICATIONS

Driver Complement

1 X 1.1” (2.79cm) Beryllium Dome Tweeter
1 X 6.5” (16.51cm) Graphene Nano-Tec Midbass

Specifications

Sensitivity: 84dB
Impedance: 4 Ohm
Frequency Response: 35 Hz – 50 KHz

Dimensions

Physical: 15.6”H x 12”D x 8.5”W
Weight: 48 lbs.



Review at HiFi News

“For the A1 Magico has leveraged its years of engineering knowhow, made sensible concessions to the bill of materials, and condensed the lot into a remarkably solid little speaker. Its design allows for great flexibility in placement, in-room, on-table or classic ‘bookshelf’ locations. And its sound is so smoothly extended and integrated that many an intermediate-sized floor stander will be put out to pasture.”

HiFi News, Paul Miller,
December 2019

read review



Review at Audioplaza

“Magico’s new A1 unleashes the most magical sound at the lowest price, and can be asserted to be the most cost-effective speaker of all. While there are certain limitations as a bookshelf speaker, there are limits to the volume and sound pressure in some sizes, but if you accept some limitations, the overall performance is not surprisingly different from that of the older A3 in the same series. Presents. The low-end dynamics, energy, and hitting performances are more than imaginative, more than imagined, and the ability to draw detailed details and three-dimensional stages without the mid-range clean, clear sound and graininess is the same as that of Magico Sound’s proprietary patent. It’s really highly appreciated that it’s all made for a bookshelf speaker at just this price.”

Audioplaza,
August 2019

read review

Request an Audition

Hear the wonder that is the Magico A1.
Request your personal audition today!
—

Call us at (703) 532-7239, e-mail us at info@commandav.com, or use the form below. We are committed to a no-pressure environment and to providing the very best in customer service before and after you make your choice. We look forward to seeing you!