Sutherland LPS for 20/20

High-Performance Audio Component

A purpose-built dual linear supply for the Sutherland 20/20

The Sutherland LPS for 20/20 replaces the two external power adapters supplied with the phono preamplifier. Inside its single enclosure are two electrically isolated 48-volt linear supplies, one for each audio channel. That arrangement preserves the 20/20's dual-mono structure rather than feeding both channel boards from a shared regulator.

The upgrade was designed specifically for the 20/20. Its two DC output cables connect directly to the phono stage, so there is no reason to improvise voltage, polarity or connector adapters. Sutherland uses a toroidal transformer to reduce radiated magnetic field, then connects its primary windings in series rather than parallel to reduce transformer flux density to half of the usual level.

AC from the transformer is full-wave rectified, current limited and applied to a first shunt-regulator stage. That regulator both establishes the initial supply voltage and smooths the current waveform drawn through the transformer. Reducing sharp charging pulses limits noise returned to the AC line and lowers the surrounding radiated field. The circuit deliberately avoids active series regulators and switching conversion in the final supply path.

The LPS does not change the 20/20's gain or loading options. Those remain separately adjustable on the right- and left-channel boards through gold-plated shunts. Its job is narrower: replace the original wall supplies with lower-noise linear power while maintaining isolated feeds for both channels.

The enclosure is 6.5 inches wide, 2.5 inches high and 13 inches deep, and weighs seven pounds. It is supplied for a specific operating voltage: standard 120 VAC or 210–250 VAC by special order. The voltage is not universal and cannot be changed in the field.

Command Performance AV can confirm the exact 20/20 version, supply voltage and included DC cables before installation, then check channel connections and physical separation from signal wiring. That avoids the remarkably unmusical outcome of treating a dedicated 48-volt supply like a generic accessory.

Sutherland LPS for 20/20 Features

  • Designed only for the Sutherland 20/20
  • Two isolated 48-volt linear supplies
  • Toroidal transformer with reduced flux density
  • Full-wave rectification and current limiting
  • Shunt regulation without switching noise
  • Preserves the phono stage's dual-mono power arrangement

Sutherland LPS for 20/20 Details

  • Outputs: two isolated 48-volt DC feeds
  • Standard input: 105–125 VAC
  • Special-order input: 210–250 VAC
  • Field voltage conversion: not supported
  • Dimensions: 6.5 × 2.5 × 13 inches
  • Weight: 7 pounds

Request an Audition

Sutherland LPS for 20/20

Hear Sutherland LPS for 20/20.
Request your audition today.
—

Call us at (703) 532-7239, or email info@commandav.com. We offer a no-pressure environment and attentive service before and after your selection.