Acoustic Signature TA-2000 NEO tonearm
TA-2000 NEO plays with the ‘big boys’ – not only because of the immaculate workmanship typical of Acoustic Signature. The tonearm combines an extraordinarily stiff and well-damped dual-layer carbon arm tube with almost frictionless precision ball bearings and an internal high-quality wiring by Mogami. In short: a tonearm that harmonizes with top-range cartridges.
Regardless if you decide for the 9 inch or 12 inch version, the Acoustic Signature TA‑2000 NEO guarantees that your turntable’s performance will realize its full sonic capabilities.
Special features:
- Tonearm with dual-layer carbon armtube
- Low resonance, rigid tube design
- Available as 9″ and 12″ version
- Excellent tracking results due to precision miniature ball bearings by SKF
- Better rigidity and smooth operation due to stainless steel tonearm axis design
- Internal studio-quality copper wiring by MOGAMI
- Supplied with external Audioquest 5-pin copper phono cable (RCA)
- Counterweight made of brass
- Adjustable VTA & azimuth
- Anti-skating knob
- Rega- and SME-type mounting versions
- 5-year warranty
Available Finishes: Chrome, Gold, Black, Silver
Absolutely Variable
To match the look of your turntable, the TA‑2000 NEO is available in various finishes – including 24-carat gold plating. In addition to the brass counterweight, an add-on weight for heavy cartridges is also included.
SKF Precision Ball Bearings
The TA‑2000 NEO comes with high-precision ball bearings by SKF that provide excellent control for optimal tracking results. For increased rigidity and smoothness, the tonearm axis is made of stainless steel.
A Tonearm for Every Cartridge
An extremely rigid yet well-damped dual-layer carbon arm tube effectively minimizes unwanted vibrations. The TA‑2000 NEO offers simple VTA, azimuth and anti-skating adjustment, allowing fine-tuning for optimum cartridge performance.
Thought Out to the Last Detail
The head shell of the TA‑2000 NEO offers virtually no surface for unwanted resonances.The internal MOGAMI studio-quality copper wiring and the included Audioquest 5‑pin copper phono cable contribute to the TA‑2000 NEO’s top-of-the-line performance.
Technical Data
| Available sizes: | 9″ version, 12″ version |
| Length: | 293 mm (9″ version), 358 mm (12″ version) |
| Effective length: | 239.3 mm (9″ version), 309 mm (12″ version) |
| Mounting distance (from pivot to center of platter): | 222 mm (9″ version), 295.8 mm (12″ version) |
| Total weight: | 545 g (9″ version), 547 g (12″ version) |
| Effective mass: | 9.6 g (9″ version), 12.6 g (12″ version) |
| Tilt angle (depends on cartridge): | 23.9° (9″ version), 12.1° (12″ version) |
| Overhang: | 17.3 mm (9″ version), 13.2 mm (12″ version) |
| Cartridge balance range: | 6 to 16 g |
| Mounting: | Rega style, SME style |
| Armtube: | Dual-layer carbon |
| Signal cable material: | Copper wiring by Mogami |
| Phono cable: | Phono cable by Audioquest |
| Connectors: | 5-pin to RCA/ground connector |
Package Contents
- TA-2000 NEO tonearm
- Counter weight
- Adjustment template
- Phono cable
- Additional weight
- Base mount
- Screws
- Toolset
- Instruction manual
Stormy Combination
The TA‑2000 NEO tonearm mounted on the Tornado NEO turntable. Available in silver (anodized), black (anodized), chrome and 24K gold-plated, the TA-2000 NEO perfectly matches the looks of the selected turntable finish.